Sirotin Šabac d.o.o. - za robu standardnih veličina i težina, trošak isporuke snosi Sirotin,
ako je porudžbina iznad 10000 RSD.
Posle Vaše porudžbine uvek prvo šaljemo ponudu.
OLI univerzalni konektor za teške uslove Morek
OLI connection terminals in an insulating sleeve are designed for connecting copper and aluminum conductors with a nominal cross-section from 6 to 300 mm2. The terminals are used to connect copper or aluminum cables with flexible busbars or cables with eyes. The individual parts are made of stainles
SR Konektori za uređaje Morek
SR reducing terminals are designed for reducing the connection cross-sections of Cu and Al conductors in fuses, control and other devices. Depending on the dimensions of the connection holes of the devices and the supply cross-section of the conductor, a suitable reducing terminal can be selected. T
Ol konektori za rad u teškim uslovima OL Morek
OL connection terminals are designed for connecting copper and aluminum conductors with a nominal cross-section from 6 to 2 x 300 mm 2. OL connection terminals are used to connect one or two conductors. The individual parts of the terminal are made of stainless steel (yoke), copper (bridge) and stee
OT konektori univerzalni 690V Morek
Univerzalne stezaljke OT se koriste za povezivanje bakarnih i aluminijumskih provodnika sa sabirnicom. Konektori omogućavaju povezivanje jednog ili dva provodnika.
OTH konektori univerzalni OTH 800-1250V Morek
OTH connection terminals are used for connecting copper and aluminum conductors to devices. OTH terminals allow the connection of two, three or four conductors up to a cross-section of 300 mm2. It is also possible to connect an indication conductor with a cross-section of 1.5-4 mm2. Compact, econom
Konektori za fotonaponske panele Morek
Press connectors for photovoltaic applications are designed for long-term outdoor use and are compatible with MC-4 connectors. Advantages • For conductors 4 ÷ 10 mm2 • Rated voltage 1500 VDC • Rated input current 40 A / 62 A • MC-4 standard • Protection class IP 68 • Easy disconnection without tools
MAJ1300S10 Konektor za rad u teskim uslovima, izolovan OLI300 Al/Cu 1x185-300mm2
OLI connection terminals in an insulating sleeve are designed for connecting copper and aluminum conductors with a nominal cross-section from 6 to 300 mm2. The terminals are used to connect copper or aluminum cables with flexible busbars or cables with eyes. The individual parts are made of stainless steel (yoke), copper (bridge), steel (screw) and plastic (case). These terminals are designed for heavy duty use. The terminals allow the clamping of stranded conductors without the need for end preparation (clamping with the flat surface of the washer, not with the point surface of the screw). The degree of protection of OLI connection terminals is IP20.
Materijal žice Al/Cu
Poprečni presek min. (mm²) 185
Poprečni presek mak. (mm²) 300
Ulazna žica min. (mm²) 185
Ulazna žica mak. (mm²) 300
Broj priključaka 1
Nazivna struja (A) 560
Nazivni napon (V) 690
Radna temperatura (°C) 80
Materijal Nerđajući čelik, kalajisan bakar, poliamid PA66, polikarbonat
Način montaže DIN šina, vijak
Širina artikla (mm) 57
Dužina artikla (mm) 143
Visina (mm) 88
Težina predmeta (g) 444
Moment zatezanja (Nm) 70 Nm
IP20
-> 
